User guide

Chapter 7: Device Management
174
See LAN Interface Settings (on page 174) for information in configuring
this section of the Network Settings page.
Note: In some environments, the default LAN Interface Speed & Duplex
setting Autodetect (autonegotiator) does not properly set the network
parameters, which results in network issues. In these instances, setting
the Dominion KX II LAN Interface Speed & Duplex field to 100 Mbps/Full
Duplex (or whatever option is appropriate to your network) addresses the
issue. See the Network Settings (on page 171) page for more
inform
ation.
LAN Interface Settings
1. The current parameter settings are identified in the Current LAN
interface parameters field.
2. Choose the LAN Interface Speed & Duplex from the following
options: