User guide

171
In This Chapter
Network Settings ...................................................................................171
Device Services.....................................................................................176
Modem Settings
.....................................................................................177
Configuring Date/Time Settings ............................................................179
Event Management ...............................................................................180
Power Suppl
y Setup Page.....................................................................187
Port Configuration Page
........................................................................189
Network Settings
Use the Network Settings page to customize the network configuration
(for example, the IP address, discovery port, and LAN interface
parameters) for your Dominion KX II device.
Basically, there are two options available to setup your IP configuration:
• None (default) - This is the recommended option (static IP). Since
the Dominion KX II is part of your network infrastructure, you most
likely do not want its IP address to change frequently. This option
allows you to set the network parameters.
• DHCP - With this option the IP address is automatically assigned by
a DHCP server.
To change the network configuration:
1. Choose Device Settings > Network. The Network Settings page
opens.
2. Update the Network Basic Settings. See Network Basic Settings
(on page 172) for more information about each of the fields.
3. Update the LAN Interface Settings
. See LAN Interface Settings (on
page 174) for more information about each of the fields.
4. Click OK to set these configuration
s. If your changes require
rebooting the device, a reboot message appears.
To reset to factory defaults:
• Click Reset to Defaults.
Note: Both IPv4 and IPv6 addresses are supported.
Chapter 7
Device Management