User guide

Chapter 3: Working with Target Servers
126
4. Select the type of restore you want to run:
• Full Restore: A complete restore of the entire system; generally used
for traditional backup and restore purposes.
• Protected Restore: Everything is restored except device-specific
information such as serial number, MAC Address, IP Address, name,
port names, etc. With this option, you can setup one Dominion
device and copy the configuration to multiple Dominion devices.
• Custom Restore: With this option, the following options are available.
Check the appropriate checkboxes:
 User and Group Restore: This option includes only user and
group information. Use this option to quickly setup users on a
different Dominion device.
 Device Settings Restore: This option includes only device
settings. Use this option to quickly copy the device information.
1. Click OK.
MPC Broadcast Port
To change the autodiscovery port from the default broadcast
port of 5000:
1. Select the device in the Navigator.
2. Choose Tools > Options. The Options dialog appears.
3. On the Advanced tab, type the new port number in the Port field of
the Broadcast Port section and then click OK.