User guide

Chapter 3: Working with Target Servers
122
10. For the Broadcast Port, type the broadcast port number in the Port
field if you want to use a port other then 5000.
11. Select the Enable IPv6 Networking checkbox for IPv6 to enable IPv4
and IPv6 dual-stack operation.
12. Select the Enable Logging checkbox only if directed to by Technical
Support. This option creates a log file in your home directory.
13. Click OK when finished. Click Apply any time while making
selections to apply it.
Upgrading Device Firmware
To update a device's firmware:
1. Connect to the device by highlighting the device's icon in the
Navigator.
2. Click Tools > Update > Update Device to perform firmware
upgrades.
3. You will be prompted to locate a Raritan firmware distribution file
(*.RFP format), which can be found on the Raritan website
(www.raritan.com) on the Firmware Upgrades page.
Ensure that you read all instructions included in Firmware Upgrade
Guide carefully before upgrading a device.
Note: Copy the firmware update file on the Raritan website to a local
machine before uploading. Do not load the file from a network drive.
Changing a Password
To update your password
1. Connect to a target by selecting it in the Navigator.