User guide

Chapter 3: Working with Target Servers
112
Absolute Mouse Mode
Note: Absolute Mouse Synchronization is available for use with the
virtual media-enabled USB CIM (D2CIM-VUSB and D2CIM-DVUSB)
only.
Note: The absolute mouse setting requires a USB target system and is
the recommended mouse setting for KX II-101.
In this mode, absolute coordinates are used to keep the client and target
cursors in sync, even when the target mouse is set to a different
acceleration or speed. This mode is supported on servers with USB
ports.
To enter absolute mouse mode:
• Choose Mouse > Absolute.