User guide

Chapter 3: Working with Target Servers
91
2. On the Connect tab, type a meaningful description of the device in
the Description field (up to 32 alphanumeric and special characters
are allowed). This description identifies the Raritan device in the
Navigator.
3. From the Product drop-down, choose the Raritan product you are
using.
4. Select the type of connection from the Connection Type drop-down.
TCP/IP connections
a. If TCP/IP Connection is selected for a LAN/WAN connection,
complete the information in the "Find Raritan device By" section:
 Type the IP address assigned to your Raritan device.
 Type the name assigned to your Raritan device during initial
setup.
 Type the Domain Name Server (DNS) name. Use this option if
you use a DNS server to resolve a DNS name to the IP address
assigned to your Raritan device.
Dial-up connection
a. Select Dial Up Connection from the Connection Type drop-down
for a direct analog modem connection to the Raritan device.
Type the parameters that should be used to establish a
connection.
Note: Dial up connection does not apply to KX101.
 Enter the phone number for the dial-up connection. Remember to
include any additional codes that should be dialed to establish a
connection, such as country codes, area codes, or outside line
access codes.