Setup guide

Dominion

KX II - Frequently Asked Questions

©Copyright Raritan, Inc. 2007 Page 7 of 13 Rev. October 2007

I’m having problems

connecting to the Dominion

KX II over my IP network.

What could be the problem?

The Dominion KX II relies on the customer’s LAN/WAN network.

Some possible problems include:

• Ethernet auto negotiation. On some networks, 10/100 auto

negotiation does not work properly and the KX II unit must be

set to 100MB/full duplex or the appropriate choice for its

network.

• Duplicate IP Address. If the IP Address of the KX II is the

same as another device, network connectivity may be

inconsistent.

• Port 5000 conflicts. If another device is using port 5000, the

KX II default port must be changed (or the other device must

be changed).

• When changing the IP Address of a KX II, or swapping in a

new KX II, sufficient time must be allowed for its IP and Mac

addresses to be known throughout the Layer 2 and Layer 3

networks.

Distributed by Communications Supply Corporation