User guide

66 DOMINION KX USER GUIDE
PC Properties
To view PC Properties, select a server in the server list and on the Setup menu, click Properties, and then
click PC (or select a server in the server list, right-clicking on it, and click Properties).
• Name: This is the name given to the target in that channel. Administrators can change the name
by typing a new one in this field. The target name can also be changed directly in the target list by
clicking on the name once after it has been highlighted.
• Type: This describes what type of target is connected to this port. This value will always be CPU
for a server target.
• Status: The availability of a target is shown in this field. Available indicates that no one is
currently viewing the target, Busy indicates that a user is currently using the target, and
Unavailable indicates that a configured target has been powered off or disconnected.
• Power Strip and Outlet: These fields are used for associating the selected target with a connected
Remote Power Control Strip (please see the Power Control section in this chapter for additional
information).
Figure 65 PC Properties Screen (shown on a Dominion KX with a Power Strip association)
Power Control (for Dominion KX only, not KX101)
The Dominion KX supports up to eight (8) power strips. Users may group or assign up to four outlets to
any of the Dominion channels. Once assigned, the power management function is available in RRC.
Setup Preparation
You must have a power strip and the P2CIM-PWR Computer Interface Module (CIM). The CIM is
included with the power strip shipment; however, if you need a replacement CIM, you can purchase a
P2CIM-PWR from Raritan Computer, Inc. or an authorized Raritan reseller.
Connecting the Power Strip
1. Connect the male RJ-45 of the P2CIM-PWR to the female RJ-45 connector on the power strip.
2. Connect the female RJ-45 connector of the P2CIM-PWR to any of the available female system port
connectors on the Dominion KX using a straight through Cat 5 cable.
3. Power ON the power strip.
4. Power ON the Dominion KX unit.