User guide

CHAPTER 4: ADMINISTRATIVE FUNCTIONS 65
Configuration Backup and Restore
On the File menu, click Backup, and then click User-Group Information to download User Group
information. On the File menu, click Backup, and then click Device Configuration to download the
complete device configuration to your local computer.
To restore User-Group information saved on your local computer, on the File menu, click Restore, and
then click User-Group Information. To restore a Device configuration saved on your local computer, on
the File menu, click Restore, and then click Device Configuration.
Performance Settings
Use this window to set up the devices’s video data transfer and bandwidth parameters.
1. On the Setup menu, click Configuration, and then click Performance. The Performance Settings
window appears.
Figure 64 Performance Settings Window
2. Pause Video Stream for Idle Users: Click on the drop-down arrow to pause the flow of video data
during periods of prolonged inactivity to prevent inactive users from needlessly consuming bandwidth.
Options: Never / 5 / 15 / 30 / 60 / 120 minutes. Please note: if Pause Video Stream is enabled and the
keyboard or mouse do not respond on the channel after the timeout, disconnect and reconnect to the
channel to resume operation,
3. Total Bandwidth Usage: Click on the drop-down arrow to set a maximum amount of bandwidth that
can be consumed by this Dominion KX unit (global). The lower the bandwidth allowed, the slower the
performance that may result. Options: No Limit / 10Mbps / 5Mbps / 2Mbps / 1Mbps / 512Kbps /
256Kbps / 128Kbps.
4. Bandwidth per User: Click on the drop-down arrow to set a maximum amount of bandwidth that can
be consumed by each user logged onto this Dominion KX unit. Options: No Limit / 10Mbps / 5Mbps /
2Mbps / 1Mbps / 512Kbps / 256Kbps / 128Kbps.
5. Click OK to set Performance Settings or click Cancel to close the window.