User guide

CHAPTER 3: RARITAN REMOTE CLIENT (RRC) 39
Remote Power Management
With a properly configured Raritan Remote Power Control Strip, RRC can manage AC Power to associated
targets by providing three options for the remote power management of targets: Power On, Power Off,
and Cycle Power.
To change the power status of a target:
1. Select the target server in RRC’s Navigator Window in the left panel of your screen.
2. Right-click on the target server, and if the target server is associated with an outlet on a Remote Power
Control Strip, choose Power On, Power Off, or Cycle Power to the target, as needed (these
commands are also part of the RRC Tools drop-down menu).
General Options
1. On the Tools menu, click Options to view the Options screen. You can customize your keyboard and
video options to optimize use of RRC.
Figure 39 RRC Options Panel
2. Click on the check box before Show scroll borders to view the thin scroll borders that show the Auto-
Scroll area.
3. Click on the check box before Auto-Sync mouse in two cursor mode to enable Automatic Mouse
Synchronization.
4. Click on the check box before Display Single cursor mode instructions if you wish to see the
following instructions when entering Single Cursor Mode.
Figure 40 Single Cursor Mode Confirmation Screen
5. In the KVM Switch OSUI Hot Key panel, click on the radio button before your choice of hot key
combinations.
6. In the Keyboard Type panel, click on the drop-down arrow and click on your keyboard choice.