User guide

10 DOMINION KX USER GUIDE
4. On the Local Access Console, log on with the default username/password of admin/raritan.
5. Press the <F5> key to activate the Administrative Menu, and select Option 5, Channel Configuration.
6. Select a server port to rename, and press the <ENTER> key. When the cursor changes to a green
color, assign a name (up to 20 characters) to identify the server connected to that port. Press
<ENTER> to complete the change.
7. Press <ESC> to exit the menu.
Change Default Password
1. Find and log on to any workstation with (a) network connectivity to your Dominion KX unit, and
(b) Java Runtime Environment v1.4.x installed (Java Runtime Environment is available at
http://java.sun.com/).
2. Launch a Web browser such as Internet Explorer or Mozilla.
3. If you are using Internet Explorer (IE) enter the following URL:
http://IP-ADDRESS/admin, where
IP-ADDRESS is the IP address that you assigned to your Dominion KX unit. If you are using another
browser such as Netscape or Mozilla, enter in
http://IP-ADDRESS/admin.html.
4. The Dominion KX remote management tool, Dominion KX Manager, will launch. Log on with the
default username and password (admin/raritan).
5. In the User Navigation tree in the left panel of the screen, select the Admin user icon.
6. Right-click on the Admin user icon and select Edit User from the shortcut menu.
7. Type a new password in the Password field. Retype the password in the Confirm Password field.
Any character can be used to create a password.
8. Click [OK] to save User properties or [Cancel] to close the window without saving.
The Default Password can also be changed from Raritan Remote Client (RRC).
1. Log on to the device at RRC with default user name admin and default password raritan.
2. Click once on the device to highlight it and right-click on it.
3. Click Update and the click User Password. The Change Password screen appears.
4. Type your old password in the Old Password field.
5. Type your new password in the New Password field.
6. Retype your new password in the Retype Password field.
7. Click OK to save new password.
Note to CommandCenter Users
If you are using Dominion KX in a CommandCenter configuration, perform the installation steps as
outlined above. After completing these steps, consult the CommandCenter user guide to proceed with your
installation. The rest of this user guide applies primarily to users deploying their Dominion KX unit(s)
without the integration functionality of CommandCenter.