User guide

CHAPTER 2: INSTALLATION 7
All target servers must be configured to one of the display resolutions supported by Dominion KX, as listed
in the beginning of this chapter. The most popular supported resolutions for Sun machines are:
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1024x768@85Hz
1152x900@66Hz
1152x900@76Hz
1280x1024@60Hz
Target servers running the Solaris operating system must output VGA video (H-and-V sync, not composite
sync). To change your Sun video card output from composite sync to the non-default VGA output, first
issue the Stop+A command to drop to bootprom mode. Then, issue the command:
setenv output-device screen:r1024x768x70
to change the output resolution. Issue the “boot” command to reboot the server.
Alternatively, you may contact your Raritan representative to purchase a video output adapter. 13W3 Suns
with composite sync output require APSSUN II Guardian converter for use with Dominion KX. HD15
Suns with composite sync output require the 1396C converter to convert from HD15 to 13W3 and an
APSSUN II Guardian converter to support composite sync. HD15 Suns with separate sync output require
an APKMSUN Guardian converter for use with Dominion KX.
Note: Some of the standard SUN background screens may not center precisely on certain SUN servers,
that is, those with dark borders. Use another background or place a light colored icon in the upper left
hand corner.
Raritan Remote Client Key Combination Equivalents
The following keys are commands specific to the special keys on the Sun keyboard. Please use the RRC
key combinations in their place.
SUN KEY RRC
Again Ctl+Alt+F2
Props Ctl+Alt+F3
Undo Ctl+Alt+F4
Front Ctl+Alt+F5
Copy Ctl+Alt+F6
Open Ctl+Alt+F7
Paste Ctl+Alt+F8
Find Ctl+Alt+F9
Cut Ctl+Alt+F10
Help Ctl+Alt+F11
Mute Ctl+Alt+F12
Compose Ctl+Alt+Kpd *
VOL+ Ctl+Alt+ +
VOL- Ctl+Alt+ -
Stop Pause/Break
Stop+A Special Pause/Break,A