User guide

Dominion KX II Version 2.5 Release Notes 9
DominionKXIIReleaseNotes2.5  255-62-4026-00-0P RoHS
4. Paragon II Dual CIMS (P2CIM-APS2DUAL and P2CIM-AUSBDUAL):
a. The Paragon Dual CIMs are basic CIMs, so advanced features such as: Virtual Media, Smart Card, Absolute Mouse
Mode, blade servers, tiering are not supported.
b. You must configure both KX II’s for either Private Mode -or- PC-Share Mode
c. The KX II user group level PC-share permissions are not supported with these CIMs.
d. Note that CIM name changes are not updated on the other KX II switch until that switch attempts to connect to that port.
Port status changes are handled similarly.
e. You can connect a dual CIM to a KX II and Paragon simultaneously, but then you must configure them both for Private
or PC-Share modes.
f. The Paragon II Public View Mode is not supported.
5. IPv6 is not supported for AKC Client. Use one of the Java Clients (VKC, MPC) instead.
6. In fall of 2010, there were new hardware versions of the D2CIM-VUSB and D2CIM-DVUSB. These CIMs will have a new
hardware version: D2CIM-[D]VUSBG2-AA and new firmware versions:
a. 4Axx for the new D2CIM-VUSB
b. 5Axx for the new D2CIM-DVUSB