Specifications

78 COMMANDCENTER SECURE GATEWAY ADMINISTRATOR GUIDE
The Add Interface Window appears.
2. Click the Interface Type drop-down menu and select the type of connection being made to
the node:
In-Band Connections
• DRAC KVM: Select this item to create a KVM connection to a Dell DRAC server
through the DRAC interface. You will be required to configure a DRAC Power interface
afterwards.
• RDP: Select this item to create a KVM connection to a node using Remote Desktop
Protocol (for example, the Remote Desktop Connection on a Windows server).
• RSA KVM: Select this item to create a KVM connection to an IBM RSA server through
its RSA interface. You will be required to configure an RSA Power interface afterwards.
• SSH: Select this item to create an SSH connection to a node.
• VNC: Select this item to create a KVM connection to a node through VNC server
software.
• iLO/RILOE KVM: Select this item to create a KVM connection to an HP server through
an iLO or RILOE interface.
Out-of-Band Connections
• KVM: Select this item to create a KVM connection to a node through a Raritan KVM
device (KX, KX101, KSX, IP-Reach, Paragon II).
• Serial: Select this item to create a serial connection to a node through a Raritan serial
device (SX, KSX).
Power Control Connections
• DRAC: Select this item to create a power control connection to a Dell DRAC server.
• IPMI: Select this item to create a power control connection to a node through an IPMI
connection.
• Managed PowerStrip: Select this item to create a power control connection to a node
powered through a Raritan PowerStrip.
• RSA: Select this item to create a power control connection to an RSA server.
• iLO/RILOE: Select this item to create a power control connection to an HP iLO/RILOE
server.
3. A default name will appear in the Name field depending on your selection. You can replace
this with a name of your choice if you want. This name will appear next to the interface in the
Nodes list.