Specifications

72 COMMANDCENTER SECURE GATEWAY ADMINISTRATOR GUIDE
If the SX 3.1 device has already been added to CC-SG, and the PowerStrip is connected to the device
later:
1. Add the SX 3.1 device to CC-SG.
2.
Configure the ports of the SX 3.1 device.
3. In the Devices tab, select the SX 3.1 device to which the PowerStrip is connected.
4. Click the + next to the device icon to expand the list of ports.
5. Right-click the SX 3.1 port that the PowerStrip is connected to, and select Add Powerstrip
from the pop-up menu.
6. Enter the number of outlets that the PowerStrip contains, and then click OK. The PowerStrip
Move an SX 3.1’s PowerStrip to a Different Port
When you physically move a PowerStrip from one SX 3.1 device or port to another SX 3.1
device or port, you must
delete the PowerStrip from the old SX 3.1 port, and add it to the new
SX 3.1 port.
Delete a PowerStrip Connected to a SX 3.1 Device
You can delete a powerstrip connected to an SX 3.1 device, even if the powerstrip is still
physically connected. If you disconnect the powerstrip from the SX 3.1 device it is associated
with, it will still appear in the devices tab beneath that device. If you want to remove it from
display, you must delete the powerstrip.
1. In the Devices tab, select the PowerStrip you want to delete.
2. On the Devices menu, click Device Manager, Delete Device.
3. Click OK to delete the PowerStrip. A Device Deleted Successfully message confirms that
the PowerStrip has been deleted. The PowerStrip icon is removed from the Devices tab.
Configure Outlets on a PowerStrip
You must configure the outlets on a PowerStrip before you can associate each outlet with a node
by adding the Managed Powerstrip interface to the node.
There are three methods for configuring outlets:
To configure outlets from the PowerStrip profile
1. In the Devices tab, click the + next to the device that is connected to the PowerStrip to
expand all ports.
2. Select the PowerStrip whose outlets you want to configure.
3. In the Device Profile: PowerStrip screen, select the Outlets tab.
4. Select the checkbox for each outlet you want to configure, and then click OK.
5. The outlets will display beneath the PowerStrip icon in the Devices tab.
To configure outlets from the Configure Ports screen
1. In the Devices tab, click the + next to the device that is connected to the PowerStrip to
expand all ports.
2. Select the PowerStrip whose outlets you want to configure.
3. On the Devices menu, click Port Manager, and then click Configure Ports.
1. To configure multiple outlets with the default names shown in the screen, select the checkbox
for each outlet you want to configure, and then click OK to configure each outlet with the
default name.
2. To configure each outlet individually, click the Configure button next to the outlet, and then
type a name for the outlet in the Port name field. Click OK to configure the port.
To delete an outlet
1. In the Devices tab, click the + next to the device that is connected to the PowerStrip to
expand all ports.