Specifications

CHAPTER 6: POWER CONTROL 71
6. Click the Managing Port drop-down menu, and then select the port on the SX 3.0 or KSX
device to which this power strip is connected.
7. (Optional) Type a short description of this PowerStrip in the Description field
8. (Optional) Check Configure All Outlets if you want to automatically add each outlet on this
PowerStrip device to the Devices tab. If you don’t configure all outlets now, you can
configure them later.
9. (Optional) For each Category listed, click the Element drop-down menu, and then select the
element you want to apply to the device from the list. Select the blank item in the Element
field for each Category you do not want to use. Please refer to
Chapter 4: Creating
Associations for details.
10. When you are done configuring this PowerStrip, click Apply to add this device and open a
new blank Add Device screen that allows you to continue adding devices. Or, click OK to
add this Power Strip without continuing to a new Add Device screen.
Delete a PowerStrip Connected to an SX 3.0 or KSX Device
You can delete a powerstrip connected to an SX 3.0, KSX or P2SC device, even if the powerstrip
is still physically connected. If you disconnect the powerstrip from the SX 3.0, KSX or P2SC
device it is associated with, it will still appear in the devices tab beneath that device. If you want
to remove it from display, you must delete the powerstrip.
1. In the Devices tab, select the PowerStrip you want to delete.
2. On the Devices menu, click Device Manager, Delete Device.
3. Click OK to delete the PowerStrip. A Device Deleted Successfully message confirms that
the PowerStrip has been deleted. The PowerStrip icon is removed from the Devices tab.
Change a PowerStrip’s Device or Port Association (SX 3.0, KSX)
If a PowerStrip is physically moved from one SX 3.0 or KSX device or port to another SX 3.0 or
KSX device or port, you must change the association in the PowerStrip Profile in CC-SG.
1. In the Devices tab, select the PowerStrip that has been moved from one SX 3.0 or KSX
device or port to another.
2. Click the Managing Device drop-down menu, and then select the SX 3.0 or KSX device that
is connected to this powerstrip.
3. Click the Managing Port drop-down menu, and then select the port on the SX 3.0 or KSX
device to which this powerstrip is connected.
4. Click OK.
Configuring PowerStrips Connected to SX 3.1
You can perform the following tasks in CC-SG to configure and manage PowerStrips connected
to SX 3.1 devices.
• Add a PowerStrip Device Connected to a SX 3.1 Device
• Move an SX 3.1’s PowerStrip to a Different Port
• Delete a PowerStrip Connected to an SX 3.1 Device
Add a PowerStrip Device Connected to an SX 3.1 Device
The procedure for adding a powerstrip connected to an SX 3.1 device varies depending on
whether the SX 3.1 device has been added to CC-SG.
If the PowerStrip is connected to the SX 3.1 device, and the device has not been added to CC-SG yet:
1. Add the SX 3.1 device to CC-SG.
2. CCSG detects the PowerStrip and adds it automatically. The PowerStrip will display in the
Devices tab, beneath the SX 3.1 device that it is connected to.