Specifications

CHAPTER 5: ADDING DEVICES AND DEVICE GROUPS 35
Chapter 5: Adding KVM and Serial Devices and
Device Groups
You must add Raritan KVM and Serial devices to CC-SG before you can use CC-SG to configure
and manage them.
If you want to add Raritan PowerStrip Devices that are connected to other Raritan devices to CC-
SG, please refer to
Chapter 6: Configuring Power Control for details.
Note: To configure iLO/RILOE devices, IPMI devices, Dell DRAC devices, IBM RSA devices or
other non-Raritan devices, use the Add Node menu and add these items as an interface. Please
refer to
Chapter 7: Configuring Nodes and Interfaces for additional information.
The Devices Tab
Click the Devices tab to display the Devices tree.
Figure 26 The Devices Tree
The Devices tab displays a set of devices and their configured ports. Ports are nested under the
devices they belong to. Devices with configured ports appear in the list with a + symbol next to
them. Click the + symbol to expand or hide the list of ports.
Right Click Options in the Device Tab
You can right-click a device or port in the Devices tab to display a menu of commands available
for the selected device or port.