Specifications

CHAPTER 3: CONFIGURING CC-SG WITH GUIDED SETUP 13
Chapter 3: Configuring CC-SG with Guided Setup
Prepare to Configure CC-SG with Guided Setup
Before proceeding with CC-SG configuration, you must complete system configuration.
• Configure and install Dominion series and IP-Reach appliances (both serial and KVM
devices), including assigning an IP address.
Guided Setup Overview
Guided Setup offers a simple way to complete initial CC-SG configuration tasks, once the
network configuration is complete. The Guided Setup interface leads you through the process of
defining Associations, discovering and adding devices to CC-SG, creating device groups and
node groups, creating user groups, assigning policies and privileges to user groups, and adding
users. Once you have completed Guided Setup, you can always edit your configurations
individually.
Start Guided Setup:
On the Administration menu, click Guided Setup. The Guided Setup window appears. The left
panel of the window lists the Guided Tasks in a tree view. The right side of the window displays
the active task’s panel.
Figure 9 Guided Setup Window
Guided Setup is divided into 4 tasks, which are each explained in the following sections:
•
Associations—Define the categories and elements that you use to organize your equipment.
•
Device Setup—Discover devices in your network and add them to CC-SG. Configure device
ports.