Specifications

230 COMMANDCENTER SECURE GATEWAY ADMINISTRATOR GUIDE
3. Type h to bring up an extensive help screen for the top command. The standard F1 help key
is not operational here. To return to the Admin Console, type CTL+Q or CTL+C.
Displaying NTP (Network Time Protocol) Status (Utilities)
This option displays the status of the NTP time daemon if it is configured and running on CC-SG.
To display status of the NTP daemon on the CC-SG:
1. Click Operation, Utilities, and then click NTP Status Display.
2. The NTP Daemon can only be configured in the CC-SG administrator’s Director Client. If
NTP is not enabled and configured properly, the following will be displayed:
Figure 210 NTP not configured in CC-SG GUI
3. If NTP is properly configured and running on the CC-SG, a display similar to this should be
generated:
Figure 211 NTP running on the CC-SG GUI
4. Selecting Refresh will update the information on this page.