Specifications

CHAPTER 13: ADVANCED ADMINISTRATION 225
OPTION DESCRIPTION
Full CC-SG Database
Reset
Selecting this option completes removes the existing CC-SG
Database and builds a new version from scratch loading it with all
the Factory Default values.
Preserve CC-SG
Personality during Reset
This option is only valid and effective if the previous option is also
selected. As the CC-SG Database is rebuilt (in the previous option),
the following values are migrated to the new version of the
database (if they can be read and are available; otherwise default
values will be used). An attempt to keep the following information
is made. Default value in brackets.
 Secure Communication [unsecured] between PC Clients and
CC-SG
 Strong Password Check [off] select if strong password
enforcement is enabled.
 Direct vs. Proxy Connections [Direct] selects if PC clients use
direct or proxy connections to Out-of-Band nodes
 Inactivity Timer [1800] the time before idle sessions log out
 Modem Setting [10.0.0.1/10.0.0.2/<none>] the setting for the
modem Server IP Address, Client IP Address, and callback
phone number.
Network Reset This option sets the networking back to Factory Defaults:
 Host name = CommandCenter
 Domain name = localdomain
 Mode = Primary/Backup
 Configuration = Static
 IP Address = 192.168.0.192
 Netmask = 255.255.255.0
 Gateway = <none>
 Primary DNS = <none>
 Secondary DNS = <none>
 Adapter Speed = Auto
SNMP Reset Resets SNMP configuration to Factory Defaults
 Port: 161
 Read-only Community: public
 Read-write Community: private
 System Contact, Name, Location: <empty>
 SNMP Trap Configuration
 SNMP Trap Destinations
Firmware Reset Removes uploaded Firmware files and restores the default versions
into filesystem repository. Does not change the CC-SG DB.
Install Firmware into CC-
SG DB
Loads Firmware files found in the filesystem-based repository into
the CC-SG DB.
Diagnostic Console Reset Restores Diagnostic Console to Factory Configuration, Account
Settings and Defaults