Specifications

CHAPTER 13: ADVANCED ADMINISTRATION 167
To configure Primary/Backup mode in CC-SG
1. On the Administration menu, click Configuration.
2. Click the Network Setup tab.
Figure 149 Network Setup Panel—Primary/Backup
3. Select Primary/Backup mode.
4. Type the CC-SG hostname in the Host name field. Please refer to Chapter 1
Terminology/Acronyms for hostname rules. When you click Update Configuration to save
the configuration, the Host name field will be updated to reflect the Fully-Qualified Domain
Name (FQDN) if a DNS and domain suffix have been configured.
5. Click the Configuration drop-down arrow and select either DHCP or Static.
DHCP:
• If you choose DHCP, the Primary DNS, Secondary DNS, Domain Suffix, IP address, Subnet
mask, and Default gateway fields will be automatically populated (if your DHCP server is
configured to provide this information) once you save this network setup and restart CC-SG.
• With the information the DHCP server provides, CC-SG registers itself dynamically with the
DNS server if it accepts dynamic updates.
• Please refer to
Recommended DHCP Configurations for CC-SG for details.
Static:
If you choose Static, type Primary DNS, Secondary DNS, Domain Suffix, IP address, Subnet
mask, and Default gateway in the appropriate fields.
6. Click the Adapter Speed drop-down arrow and select a line speed from the list. Make sure
your selection agrees with your switch’s adapter port setting.
7. If you selected Auto in the Adapter Speed field, the Adapter Mode field is disabled, with
Full Duplex selected automatically. If you specified an Adapter Speed other than Auto, click
the Adapter Mode drop-down arrow and select a duplex mode from the list.
8. Click Update Configuration to save the network setup.
9. Your changes will not take effect until CC-SG restarts.
• Click Restart Now if you want to automatically restart CC-SG now.
• Click Restart Later if you would like to manually
restart CC-SG later.
• Click Cancel to return to the Network Setup panel without saving your changes. You must
click Update Configuration, then click Restart Now or Restart Later to save your changes.
Note: If CC-SG is configured with DHCP, you can access CC-SG via the hostname after a
successful registration with the DNS server.