Specifications

CHAPTER 13: ADVANCED ADMINISTRATION 165
Delete Firmware
1. On the Administration menu, click Firmware.
2. Click the Firmware Name drop-down arrow and select the firmware to be deleted.
3. Click Delete. The Delete Firmware window appears.
4. Click Yes to delete the firmware or No to close the window.
Configuration Manager
The Configuration Manager contains many of the CC-SG core settings:
• Network Setup
• Logs
• Inactivity Timer
• Time/Date
• Connection Mode
• Device Settings
• SNMP Configuration.
About Network Setup
CC-SG offers two modes for network setup:
•
Primary/Backup mode
•
Active/Active mode
CC-SG also allows either Static or DHCP-assigned IP addresses. Please refer to
Recommended
DHCP Configurations for CC-SG for best practices on using DHCP with your CC-SG.
About CC-SG LAN Ports
A CC-SG provides two main LAN ports: Primary LAN and Secondary LAN. Primary/Backup
and Active/Active modes require you to connect the CC-SG LAN ports in different ways.
Please refer to the tables below to check the locations of the Primary and Secondary LAN ports
on your CC-SG model.
G1 LAN Ports
MODEL PRIMARY LAN NAME PRIMARY LAN
LOCATION
SECONDARY LAN
NAME
SECONDARY LAN
LOCATION
G1 LAN0 Right LAN port LAN1 Left LAN port
V1 LAN Ports
MODEL PRIMARY LAN NAME PRIMARY LAN
LOCATION
SECONDARY LAN
NAME
SECONDARY LAN
LOCATION
V1 LAN1 Left LAN port LAN2 Right LAN port
E1 LAN Ports
MODEL PRIMARY LAN NAME PRIMARY LAN
LOCATION
SECONDARY LAN
NAME
SECONDARY LAN
LOCATION
E1 Not labeled. Top LAN port in
set of 2 ports in
center of unit back
panel
Not labeled. Bottom LAN port
in set of 2 ports in
center of unit back
panel