Specifications

Chapter 3: Getting Started
18
Download Installation Files
Download the files you need to complete the installation from the Raritan
website, or from the product DVD. You must be logged in to the Raritan
Licensing Portal to access the files from the website. See Get Your
License (on page 19).
The installation files are packaged in two .ZIP files.
The vccsg_rel_50554_ovf.ZIP file contains:
 .OVF file used to deploy the virtual appliance
The flexserver-11.8-raritan.ZIP file contains:
 Raritan vendor daemons for Linux and Windows
 Flexera
™
FlexNet Publisher
®
license server tool kit for Linux and
Windows
Install License Server Software on a Linux or Windows Server
CommandCenter Secure Gateway virtual appliance requires the
Flexera
™
FlexNet Publisher
®
license server software to be installed on a
physical server. See Requirements for supported servers.
Linux Server
1. Log in to the Linux server.
2. Add a user called flex to the system.
3. Log in as flex and open the terminal.
4. Copy the flexserverv11.8-linux.tar.gz file you downloaded to
home/flex. Unzip the contents to the same location.
5. Type the command:
tar -xvzf flexserverv11.8.tar.gz
The files are unpacked. The following directories are created:
 flexserverv11.8
 i86_lsb is created under flexserverv11.8
6. Unzip the 5-0-5-raritan-daemon/raritan-linux32-1.0.zip file to
home/flex.
7. Move the Raritan vendor daemon file using this command:
cp raritan /home/flex/flexserverv11.8/i86_lsb/
8. Enter this command:
chmod +x raritan