Specifications

Chapter 15: Advanced Administration
251
6. Click Update.
To customize the message in the JRE Incompatibility Warning
window:
1. Choose Administration > Configuration.
2. Click the Custom JRE tab.
3. Using HTML code, enter the message that appears in the JRE
Incompatibility Warning window.
4. Click Update.
To restore the default message and minimum JRE version:
1. Choose Administration > Configuration.
2. Click the Custom JRE tab.
3. Click Restore Default.
4. Click Update.
To clear the default message and minimum JRE version:
1. Choose Administration > Configuration. Click the Custom JRE tab.
2. Click Clear.
Configuring SNMP
Simple Network Management Protocol allows CC-SG to push SNMP
traps (event notifications) to an existing SNMP manager on the network.
You should be trained in handling SNMP infrastructure to configure
CC-SG to work with SNMP.
CC-SG also supports SNMP GET/SET operations with third-party
solutions, such as HP OpenView. To support the operations, you must
provide SNMP agent identifier information such as these MIB-II System
Group objects: sysContact, sysName, and sysLocation. These identifiers
provide contact, administrative, and location information regarding the
managed node. See RFC 1213 for details.
To configure SNMP in CC-SG:
1. Choose Administration > Configuration.
2. Click the SNMP tab.
3. Select the Enable SNMP Daemon checkbox to enable SNMP
operations.