Specifications

Chapter 15: Advanced Administration
249
To enable or disable a warning message for all power
operations:
Select the Display Warning Message For All Power Operations checkbox
to enable a warning message that alerts a user before a requested
power operation occurs. Only the user who initiated the power operation
sees the message. The user can cancel the power operation or confirm it
by clicking Yes or No in the message.
1. Choose Administration > Configuration.
2. Click the Device Settings tab.
3. Select the Display Warning Message For All Power Operations
checkbox to enable the warning message. Deselect the checkbox to
disable the warning message.
4. Click Update Configuration to save your changes.
Enabling the AKC Download Server Certificate Validation
If you are using the AKC client, you can choose to use the Enable AKC
Download Server Certificate Validation feature or opt not to use this
feature.
Option 1: Do Not Enable AKC Download Server Certificate
Validation (default setting)
If you do not enable AKC Download Server Certificate Validation, all KX
II users and CC-SG Bookmark and Access Client users must:
 Ensure the cookies from the IP address of the device that is being
accessed are not currently being blocked.
 Windows Vista, Windows 7 and Windows 2008 server users should
ensure that the IP address of the device being accessed is included
in their browser's Trusted Sites Zone and that Protected Mode is not
on when accessing the device.
Option 2: Enable AKC Download Server Certificate Validation
If you do enable AKC Download Server Certificate Validation:
 Administrators must upload a valid certificate to the CommandCenter
Secure Gateway or generate a self-signed certificate on the
CommandCenter Secure Gateway. The certificate must have a valid
host designation.
 Each user must add the CA certificate (or a copy of self-signed
certificate) to the Trusted Root CA store in their browser.
To install the self-signed certificate when using Windows Vista
®
operating system and Windows 7
®
operating system:
1. Include the CommandCenter Secure Gateway IP address in the
Trusted Site zone and ensure 'Protected Mode' is off.