Specifications

Chapter 14: System Maintenance
233
To power down the CC-SG:
1. Remove the bezel and firmly tap the POWER button.
2. Wait approximately one minute while CC-SG gracefully powers
down.
Note: Users logged into CC-SG via Diagnostic Console will receive a
short broadcast message when the CC-SG unit is powered down.
Users logged into CC-SG via a web browser or SSH will not receive
a message when the CC-SG unit is powered down.
3. If you must remove the AC power cord, let the power down process
finish completely before removing the power cord. This is required
for CC-SG to complete all transactions, close the databases, and
place the disk drives into a safe state for power removal.
Ending CC-SG Session
There are two ways to end a CC-SG Session.
 Log out to end your session while keeping the client window open.
See Log Out of CC-SG (on page 233).
 Exit to end your session and close the client window. See Exit
CC-SG (on page 233).
Log Out of CC-SG
1. Choose Secure Gateway > Logout. The Logout window opens.
2. Click Yes to log out of CC-SG. Once you log out, the CC-SG login
window opens.
Exit CC-SG
1. Choose Secure Gateway > Exit.
2. Click Yes to exit CC-SG.