Specifications

Chapter 8: Nodes, Node Groups, and Interfaces
130
3. Power Strip Name: select the Power Strip or PX device that provides
power to the node. The power strip or PX device must be configured
in CC-SG before it appears in this list.
4. Outlet Name: select the name of the outlet the node is plugged into.
Optional.
5. Type a description of this interface in the Description field.
6. Click OK to save your changes.
Note: A Managed Power Strip interface can be added to a blade chassis
node, but not to a blade server node.
Interfaces for IPMI Power Control Connections
To add an interface for IPMI power control connections:
1. Type the IP Address or Hostname for this interface in the IP
Address/Hostname field.
2. Type a UDP Port number for this interface in the UDP Port field.
3. Authentication: select an authentication scheme for connecting to
this interface.
4. Type a check interval for this interface in the Check Interval
(seconds) field.
5. Enter authentication information:
 To use a service account for authentication, select the Use
Service Account Credentials checkbox. Select the service
account to use in the Service Account Name menu.
or
 Enter a Username and Password for authentication. Optional.
6. Type a description of this interface in the Description field.
7. Click OK to save your changes.