User's Manual

Chapter 3: Multi-Platform Client and Raritan Remote Client
91
TCP/IP Connections
a. If TCP/IP Connection is selected for a LAN/WAN connection,
complete the information in the "Find Raritan device By" section:
 Type the IP address assigned to your Raritan device.
 Type the name assigned to your Raritan device during initial
setup.
 Type the Domain Name Server (DNS) name in the Host Name
field. Use this option if you use a DNS server to resolve a DNS
name to the IP address assigned to your Raritan device.
a. To use the default port settings for the HTTPS port (port 443)
and the Discovery port (port 5000), leave their respective Use
Default checkboxes selected. As long as the Use Default
checkboxes are selected, the HTTPS Port and Discovery Port
fields are not active.
If you would like to change the default ports to other ports,
deselect the respective Use Default checkbox and enter the port
in the appropriate field. For example, to change the HTTPS port,
deselect its Use Default checkbox and enter the port number in
the HTTPS field.
Dial-up Connection
b. Select Dial Up Connection from the Connection Type drop-down
for a direct analog modem connection to the Raritan device.
Type the parameters that should be used to establish a
connection.
 Enter the phone number for the dial-up connection. Remember to
include any additional codes that should be dialed to establish a
connection, such as country codes, area codes, or outside line
access codes.