User's Manual

Chapter 3: Multi-Platform Client and Raritan Remote Client
86
Note: The Compression and Security tabs are not available for
Generation 2 devices.
Connect Tab
2. On the Connect tab, type a meaningful description of the device in
the Description field. This description identifies the Raritan device in
the Navigator.
3. Select Dial Up Connection from the Connection Type drop-down for
a direct analog modem connection to the Raritan device. Type the
parameters that MPC or RRC should use to establish a connection.
Dial up connection does not apply to Generation 2 (G2) or KX101.
 Enter the phone number for the dial-up connection. Remember to
include any additional codes that should be dialed to establish a
connection, such as country codes, area codes, or outside line
access codes.
 Select the modem (as configured in Windows) from the drop-
down list that will be used to dial and connect to your Raritan
device.
Note: For security reasons, you must use the MPC standalone client
if you require modem access. Further, one modem on a client PC
can be used for only one device connection.