User's Manual

Chapter 3: Multi-Platform Client and Raritan Remote Client
82
Note: For security reasons, you must use the MPC standalone client
if you require modem access. Further, one modem on a client PC
can be used for only one device connection.
Note: Dial-up is not support in KX II-101.
5. Select the Use Default Port Number checkbox to use the default port
number (5000). For TCP Ports, devices are automatically configured
to use TCP Port 5000 when communicating with the client.
If you do not want to use the default port number, deselect the
checkbox and type the port number in the Port Number field.
Compression Tab
6. Set the Connection Speed.
Use this setting to manually adjust the connection speed to
accommodate bandwidth constraints. Devices can automatically
detect available bandwidth and not limit bandwidth use. However,
you can also adjust this usage according to your needs. Depending
on the Raritan device in use, different options may be available:
 Auto Detect
 1G Ethernet
 100mb Ethernet
 10mb Ethernet
 1.5mb (Max DSL/T1)
 1mb (Fast DSL/T1)
 512 kb (Medium DSL/T1)
 384 kb (Slow DSL/T1)