User's Manual

Chapter 3: Multi-Platform Client and Raritan Remote Client
81
3. From the Product drop-down, choose the Raritan product you are
using.
TCP/IP Connections
4. Select the type of connection from the Connection Type drop-down.
a. If TCP/IP Connection is selected for a LAN/WAN connection,
complete the information in the "Find Raritan device By" section:
 Type the IP address assigned to your Raritan device.
 Type the name assigned to your Raritan device during initial
setup.
 Type the Domain Name Server (DNS) name in the Host Name
field. Use this option if you use a DNS server to resolve a DNS
name to the IP address assigned to your Raritan device.
Dial-up Connections
a. Select Dial Up Connection from the Connection Type drop-down
for a direct analog modem connection to the Raritan device.
Type the parameters that should be used to establish a
connection.
 Enter the phone number for the dial-up connection. Remember to
include any additional codes that should be dialed to establish a
connection, such as country codes, area codes, or outside line
access codes.
 Select the modem (as configured in Windows) from the drop-
down list that will be used to dial and connect to your Raritan
device.