User's Manual

Setting Up Event Logging
88
Configuring SNMP Logging
EventloggingcanbeperformedbysendingSNMPtrapstoathird‐party
SNMPmanager.RefertotheUsingSNMPappendixforinstructionson
enablingSNMPEventLoggingonDominionPX.
Configuring Syslog Forwarding
ToconfigureSyslogForwarding:
1. ChooseDeviceSettings‐‐>EventLog.TheEventLogSettings
windowappears.TheSyslogForwardingpanelcontrolsforwarding
ofsystemlogs.

2. ClickthecheckboxlabeledEnableSyslogForwarding.
3. TypeanIPaddressintheIPAddressfield.Thisistheaddressto
whichsyslogwillbeforwarded.
4. Bydefault,whenSyslogForwardingisenabled,seveneventtypes
appearintheEventLogAssignmentspaneltotheright.Allare
disabledbyde
fault.Toenableanyoftheseeventtypes,checkthe
appropriatecheckboxes.

5. ClickApply.SyslogForwardingisconfigured.