User's Manual

Chapter 5: Using the Web Interface
87
Configuring SMTP Logging
ToconfigureSimpleMailTransferProtocol(SMTP)logging:
1. ChooseDeviceSettings‐‐>EventLog.TheEventLogSettings
windowappears.TheSMTPLoggingpanelcontrolsSMTPlogging.

2. ClickthecheckboxlabeledSMTPLoggingEnabled.
3. TypethereceiverʹsemailaddressintheReceiverEmailAddress
field.
4. Bydefault,whenSMTPloggingisenabled,seveneventtypesappear
intheEventLogAssignmentspaneltotheright.Allaredisabledby
default.Toenableanyoftheseeventtyp
es,checktheappropriate
checkboxes.

5. ClickApply.SMTPloggingisconfigured.
Important:IfyouhavenotconfiguredtheDominionPXʹsSMTP
settings,youmustdosoforSMTPloggingtowork.Clicktheherelink
atthebottomofthepanel.Referto“ConfiguringtheSMTPsettings(on
page97)”se
ctionforinstructions.