User's Manual

Chapter 3: Installation and Configuration

 Bitspersecond=9600

 Databits=8

 Stopbits=1

 Parity=None

 Flowcontrol=None

Note:The“Flowcontrol”parametermustbesetto“None”forthe

communicationsprogramtoworkcorrectlywiththeDominionPX.

2. Pointthecommunicationsprogramattheserialportconnectingthe

DominionPXandopenaterminalwindow.

3. PressEntertodisplaytheopeningconfigurationprompt.



4. TypeconfigandpressEntertobegintheconfigurationprocess.You

arepromptedtoselectanIPconfigurationmethod.



5. YoumustassigntheDominionPXanIPaddress.Therearetwo

waystodothis:

 Autoconfiguration Selectanautoconfigurationmethod

suchasdhcporbootpandlettheDHCPorBOOTPserver

providetheIPaddress.

 StaticIPaddress SelectNoneandassignthe

DominionPXastaticIPad

dress.Youwillbepromptedforthe

address,networkmask,andgateway.