User's Manual

Chapter 2: Rack-Mounting the Dominion PX
9
To Mount:
• SnapfittheclawfeetmountsontothebackoftheDominionPXunit.
Leaveatleast24inchesbetweenthebuttonsforstability.Oncethe
clawfeetaremountedontheDominionPXrail,theywillnotreadily
move‐aflat‐headscrewdrivercanbeusedtoremovethefeetifthey
needtober
epositioned.
• Alignthesilverbuttonswiththemountingholesinthecabinet,and
ensurethatbothbuttonscanengagetheirmountingholes
simultaneously.
• PresstheDominionPXforward,pushingthesilverbuttonsthrough
themountingholes,thenlettingtheDominionPXdropabout5/
8ths
ofaninch.ThiswillsecuretheDominionPXinplaceandcomplete
theinstallation.
Thepictureshowshowfirmpressureisappliedtosnapfittheclawfeet
totheDominionPXZero‐Uunit.Hookonesideoftheproductbodyinto
onesideofaclawfootfir
st,andthenapplypressuretosnapinthe
secondside.

