User's Manual

Appendix E: Using the IPMI Tool Set
141
getciphers <all | supported> <ipmi | sol> [channel]
Displaysthelistofciphersuitessupportedforthegivenapplication
(ipmiorsol)onthegivenchannel.
Example
$ ipmitool -I lan -H allen-dpxpcr20-20 -U admin -P
raritan1 channel getciphers ipmi 14

Event Commands
TheEventcommandsallowyoutosendpre‐definedeventstoa
ManagementController.
<predefined event number>
Sendsapre‐definedeventtotheSystemEventLog.TheCurrently
supportedvaluesforare:
• Temperature:UpperCritical:GoingHigh
• VoltageThreshold:LowerCritical:GoingLow
• Memory:CorrectableECCErrorDetected
Note:Thesepre‐definedeventswilllikelynotproduceʺaccurateʺSEL
recordsforaparticularsystembecausetheywillnotbecorrectlytiedtoa
validsensornumber,buttheyaresufficienttoverifycorrectoperationof
theSEL.
Example
$ ipmitool -I lan -H allen-dpxpcr20-20 -U admin -P
raritan1 event 1