User's Manual

Channel Commands
140
Example
$ ipmitool -I lan -H 192.168.51.58 -U admin -a channel
authcap 14 5

RefertotheIPMIPrivilegesLevelssectionforadditionalinformation
aboutIPMIprivileges.

info [channel number]
Displaysinformationabouttheselectedchannel.Ifnochannelisgivenit
willdisplayinformationaboutthecurrentlyusedchannel:
Example
$ ipmitool -I lan -H 192.168.51.58 -U admin -a channel
info

getaccess <channel number> [userid]
Configuresthegivenuseridasthedefaultonthegivenchannelnumber.
Whenthegivenchannelissubsequentlyused,theuserisidentified
implicitlybythegivenuserid.
Example
$ ipmitool -I lan -H allen-dpxpcr20-20 -U admin -P
raritan1 channel getaccess 14 63

setaccess <channel number> <userid>[callin=on|off]
[ipmi=on|off] [link=on|off] [privilege=level]
Configuresuseraccessinformationonthegivenchannelforthegiven
userid.
Example
$ ipmitool -I lan -H allen-dpxpcr20-20 -U admin -P
raritan1 channel setaccess 14 63 privilege=5
