User's Manual

Enabling SNMP
132
Enabling SNMP
TocommunicatewithanSNMPmanager,youmustfirstenablethe
SNMPagentonDominionPX.ThiscanbedonefromtheSNMPSettings
window:
1. SelectDeviceSettings,andthenselectSNMPSettings.TheSNMP
Settingswindowappears.

2. ChecktheboxforEnableSNMPAgenttoenabletheDominionPX
tocommunicatewithexternalSNMPmanagers.Anumberof
optionswillthenbecomeavailable.
3. CheckEnableSNMPv1/v2cProtocoltoenablecommunication
withanSNMPmanagerusingSNMPv1orv2cprotocol.Thentype
theSN
MPread‐onlycommunitystringintheReadCommunity
fieldandtheread/writecommunitystringintheWriteCommunity
field.
4. CheckEnableSNMPv3Protocoltoenablecommunicationwithan
SNMPmanagerusingSNMPv3protocol.