User's Manual

Appendix C: Using the CLP Interface
127

6. YouarenowloggedintotheCLPinterfaceandcanbeginusingthe
interfacetoadministertheDominionPX.
Using SSH or Telnet
TologinusingSSHorTelnet:
1. LaunchanSSHorTelnetclientsuchasPuTTYandopenaconsole
window.ALoginpromptappears.

2. TypealoginnameandpressEnter.Youarepromptedtoentera
password.

3. TypeapasswordandpressEnter.Thepasswordiscase‐sensitive,so
makesureyoucapitalizethecorrectletters.Oncethepasswordis
accepted,theclp:/‐>systempromptappears.

4. YouarenowloggedintotheCLPinterfaceandcanbeginusingthe
interfacetoadministertheDominionPX.
Showing Outlet Information
Theshowcommanddisplaysthename,powerstate(onoroff),and
associatedsensorsforoneoutletorforalloutlets.