User's Manual

Chapter 5: Using the Web Interface

Configuring the SMTP Settings

TheDominionPXallowsyoutoconfigurealertstosendanemail

messagetoaspecificadministrator.Todothis,youhavetoconfigurethe

DominionPXʹsSMTPsettingsandenteranIPaddressforyourSMTP

serverandasenderʹsemailaddress.

Note:Referto“SettingUpAlerts(onpa

ge76)”sectionforinstructions

onconfiguringalertstosendemails.



1. ChooseDeviceSettings‐‐>SMTPSettings.TheSMTPSettings

windowappears.



2. TypetheIPaddressofthemailserverintheSMTPServerfield.

3. TypeanemailaddressforthesenderintheSenderEmailAddress

field.

4. IfyourSMTPserverrequirespasswordauthentication,typeauser

nameandpasswordintheUserAccountandPasswordfields.

5. ClickApp

ly.Emailisconfigured.

6. NowthatyouhaveappliedtheSMTPsettings,youcantestthemto

ensuetheyworkcorrectly.Todothis,typethereceiverʹsemail

addressintheReceiverAddressfieldandclickSend.

Important:DonottesttheSMTPsettingsuntilyouhavefi

rstapplied

them.Ifyoudo,youwilllosethesettingsandbeforcedtore‐enter

them.