User's Manual

Managing the Dominion PX
94
Modifying the Communications, Port and Bandwidth
Settings
YoucanuseTelnetorSSHtologintotheDominionPXʹsCLPinterface.
However,bydefaultSSHisenabledandTelnetisnot(becauseit
communicatesintheclearandisthereforenotsecure).Youcanchange
thisandenableordisableeitherapplication.
Youcanalsosetaba
ndwidthlimit,andchangeanyofthedefaultport
settings.Finally,youcanenableordisabletheRaritanSetupProtocol.
Todoallthis:
1. ChooseDeviceSettings‐‐>Network.TheNetworkSettingswindow
appears.TheMiscellaneousNetworkSettingspanelonthetop
rightcontainsthecommunications,port,andbandwidthsettings.

2. Bydefault,CLP‐TelnetisdisabledandCLP‐SSHisenabled.To
changethis,clickeithercheckbox.
3. TosetanupperlimitontheamountofbandwidthTelnetorSSHwill
beallowedtouse,typethenumberofkilobitspersecondinthe
BandwidthLimitfield.
4. Byde
fault,theHTTP,HTTPS,Telnet,andSSHportsaresettothe
standardportsforthesecommunicationsprotocols.Ifyoupreferto
usedifferentports,youcanchangetheportassignmentshere.
5. ClickthecheckboxlabeledDisableSetupProtocoltodisableit.