Network Hardware User Manual

140 DOMINION SX USER GUIDE
Sendeventlog Command
The sendeventlog command sends the local logfile to a remote FTP server.
The syntax of the sendeventlog command is:
sendeventlog [ip ipaddress] [login login] [password password]
[path pathname] [file filename]
The sendeventlog command options are described in
Table 53
Table 53 Sendeventlog Command
COMMAND OPTION DESCRIPTION
ip ipaddress
FTP server IP address
login login
FTP Server login name
password password
FTP Server password
path pathname
FTP server path. For example, /ftphome
file filename
Filename on FTP server to save log. For example, sxlogfile
Sendeventlog Command Example
admin > Config > Log > sendeventlog 72.236.162.187 login acy
password pasraritansword path sxlogfile file log 32
Upgrade Command
Note: in order to perform an upgrade, there should be a configured remote ftp server.
The upgrade command upgrades one version of the system to another version, for example v2.5
to v3.0.
The syntax of the upgrade command is:
upgrade [ip ipaddress] [login login] [password password] [path
pathname]
The command options are described in
Table 54Table 53
Table 54 Upgrade Command
COMMAND OPTION DESCRIPTION
ip ipaddress
IP Address of FTP Server
login login
FTP Server login name
password password
FTP Server password
path pathname
FTP server path. —For example, /ftphome/UpgradePack/Pack1of1
upgrade Command Example
admin > Maintenance > upgrade ip 10.0.0.188 login sx password
qaz1wsx path /var/ftp/UpgradePack_2.5.6_3.0.0.1.15/Pack1of1