Network Hardware User Manual

CHAPTER 12: COMMAND LINE INTERFACE 125
SSH Command
The syntax of the ssh command is:
ssh [enable <true|false>] [port value]
The ssh command options are described in
Table 31.
Table 31 SSH Command
COMMAND OPTION DESCRIPTION
enable <true|false>
Enable or disable SSH access.
port value
SSH server tcp listen port
SSH Command Example:
admin > Config > Services > ssh enable true port 4
The system displays this message after entering the preceding command:
The system will need to be rebooted for changes to take effect.
Telnet Command
The syntax of the telnet command is:
telnet [enable <true|false>] [port value]
The telnet command options are described in the following table.
Table 32 Telnet Command
COMMAND OPTION DESCRIPTION
enable <true|false>
Enable or disable Telnet access.
port value
Telnet server tcp listen port
Telnet Command Example
The command below enables telnet access on port 23.
admin > Config > Services > telnet enable true port 23