Switch User Manual

ManualsBrandsRaritan Computer ManualsSwitchPARAGON II P2UMT242

Paragon II QSG 1

QSG-P2-0J-v4.5-E y 255-30-6010-00

Paragon® II

Quick Installation and Setup Guide

Congratulations on your purchase of Paragon II devices comprising of analog Keyboard/Video/Mouse (KVM) switches and

accessory devices that enable users to access and control multiple servers from a set of keyboard, mouse and monitor.

The document provides instructions for basic installation, initial login and channel access. For more detailed information on

the Paragon II products, consult the User Guide accessible from the accompanying User Manuals and Quick Setup

Guides CD or Raritan website's Firmware and Documentation webpage

(http://www.raritan.com/support/firmware-and-documentation/).

Note: The Ethernet port on the Paragon switch is hard coded (not configurable) and supports only 10-BaseT/half duplex.

Paragon II cover 4 basic types of devices:

Main Switching Unit (Main Unit)

Models:P2‐UMT242,P2‐UMT442,P2‐UMT832M,P2‐UMT1664M

Stacking Unit

Models:P2‐UMT832S,P2‐UMT1664S

User Station

Models:P2‐UST,P2‐EUST,P2‐EUST/C

Computer Interface Module (CIM)

Models:P2CIM‐APS2,P2CIM‐AUSB,P2CIM‐ASUN,andmore

Summary of content (6 pages)

PAGE 1
Paragon® II Quick Installation and Setup Guide Congratulations on your purchase of Paragon II devices comprising of analog Keyboard/Video/Mouse (KVM) switches and accessory devices that enable users to access and control multiple servers from a set of keyboard, mouse and monitor. The document provides instructions for basic installation, initial login and channel access.
PAGE 2
Package Contents Paragon Main Unit (P2-UMT242, P2-UMT442, P2-UMT832M, or P2-UMT1664M): • • • • • • • Main Unit x 1 20-ft. (6.1-m) Cat5 test cable x 2 6-ft. (1.
PAGE 3
1. Secure the cable-support bar to the front end of the side brackets, near the side brackets' “ears,” using two of the included screws. 2. Slide the user station or KVM switch between the side brackets, with its rear panel facing the cable-support bar, until its front panel is flush with the back edges of the side brackets. 3. Secure the user station or switch to the side brackets using the remaining included screws (three on each side). 4.
PAGE 4
d. Repeat Steps a to c if you want to add one more Stacking Unit. 5. Turn on all Paragon II devices. 6. Set the total number of connected Stacking Units on the front panel of the Main Unit. a. Press the FUNC button to activate the Function Menu. b. Press the U and V buttons to select "Stacking Support." c. Press the ENT button to confirm your selection. d. Press the U and V buttons to select the total number of Stacking Units—3 maximum for P2-UMT832M or 1 maximum for P2-UMT1664M. e.
PAGE 5
Channels connecting to servers appear in green. At first there are no names for any servers so all Name fields are blank. Tip: If the server provides a DVI-D connector instead of a VGA port, Raritan recommends that you connect the CIM to the server using a Smart View DVI-to-VGA (female to female) converter (DV-101). Note that currently only the Smart View DVI-to-VGA converter has been tested and is officially supported by Raritan for use with Paragon II. 3. Turn on the server. 4.
PAGE 6
CIM model PS/2 connector UKVMC V VGA connector HD15 Local ports V USB CIMs CIM model USB connector VGA connector CIM model Local ports Automatic skew compensation P2CIM-APS2-B V P2CIM-AUSB V V P2CIM-AUSB* V HD15 P2CIM-AUSBD UAL P2CIM-AUSBDUAL* V HD15 P2CIM-AUSB-B V P2CIM-AUSB-B V HD15 P2CIM-AUSB-C V P2CIM-AUSB-C* V HD15 P2CIM-ASUN V Support for IBM Blade servers Support for card reader V V V * These USB CIMs also support Sun servers via the SUN USB ports.