User's Manual

Chapter 5: EMX Device Management
75
Note: The EMX folder is named "EMX" by default. The name
changes after customizing the device name. See Naming the EMX
Device (on page 72).
2. Click Setup on the Settings page. The EMX Setup dialog appears.
3. Type an integer number in the Altitude field. Depending on the
measurement unit displayed, the range of valid numbers differs.
 For meters (m), the value ranges between 0 and 3000.
 For feet (ft), the value ranges between 0 and 9842.
4. Click OK to save the changes.
Changing the Measurement Units
By default, the following measurement units are applied to all data shown
in the EMX web interface:
 Temperature: degrees in Celsius ( )
 Length or height: meters (m)
 Air pressure: pascal (pa)
The EMX web interface allows shows different measurement units based
on user login name. That is, different users may see different
measurement units displayed according to their preferences. The other
alternatives for each measurement unit include:
 Temperature: degrees in Fahrenheit ( )
 Length or height: feet (ft)
 Air pressure: psi
Determine the desired measurement unit when creating user profiles.
See Creating a User Profile (on page 62), and Setting Up User
Preferences (see "Setting Up User Preferences (Units of Measure)"
on page 67) and Setting Up Default User Preferences (see "Setting
Up Default User Preferences (Units of Measure)" on page 67). To
change the measurement unit setting, you must have the administrator
privileges.
To set the preferred measurement units:
1. Choose User Management > Users. The Manage Users dialog
appears.
2. Select the user by clicking it.
3. Click Edit or double-click the user. The Edit User 'XXX' dialog
appears, where XXX is the user name.
4. Click the Preferences tab.