User's Manual

72
In This Chapter
Overview .................................................................................................. 72
Naming the EMX Device ......................................................................... 72
Displaying the Device Information ........................................................... 73
Setting the Date and Time ....................................................................... 73
Specifying the Device Altitude ................................................................. 74
Changing the Measurement Units ........................................................... 75
Determining How to Display Tree Items .................................................. 76
Modifying the Network Configuration ...................................................... 78
Modifying the Network Service Settings .................................................. 84
Configuring the SMTP Settings ............................................................... 92
Setting Up an EMX Using Bulk Configuration ......................................... 94
Backup and Restore the EMX Device Settings ....................................... 96
Firmware Upgrade ................................................................................... 97
Network Diagnostics ................................................................................ 99
Downloading Diagnostic Information ..................................................... 100
Rebooting the EMX ............................................................................... 102
Resetting to Factory Defaults ................................................................ 102
Overview
Following is information on setting up and managing the EMX after the
EMX device is installed.
Optionally, if you have already installed and configured an EMX and are
now configuring a different EMX, you can use the Bulk Configuration
feature to make the configuration process easier. See Setting Up an
EMX Using Bulk Configuration (on page 94).
Naming the EMX Device
The default name for an EMX device is EMX, which can be changed as
needed.
To change the device name:
1. In left navigation panel, click the EMX folder. The Settings page
opens.
Note: The EMX folder is named "EMX" by default. The name
changes after customizing the device name. See Naming the EMX
Device (on page 72).
2. Click Setup on the Settings page. The EMX Setup dialog appears.
3. Type a new name in the Device Name field.
Chapter 5
EMX Device Management