User's Manual

Chapter 2: Installing and Configuring the EMX Device
17
To set
Use this command
Authentication
method
network wireless authMethod
<method>
where <method> is psk for Pre-Shared
Key or eap for Extensible
Authentication Protocol.
PSK
network wireless PSK <psk>
where <psk> is the PSK string.
EAP outer
authentication
network wireless
eapOuterAuthentication
<outer_auth>
where <outer_auth> is PEAP.
EAP inner
authentication
network wireless
eapInnerAuthentication
<inner_auth>
where <inner_auth> is MSCHAPv2.
EAP identity
network wireless eapIdentity
<identity>
where <identity> is your user name for
EAP authentication.
EAP password
network wireless eapPassword
When prompted to enter the password
for EAP authentication, type the
password.
EAP CA
certificate
network wireless
eapCACertificate
When prompted to enter the CA
certificate, open the certificate with a
text editor, copy and paste the content
into the communications program.
Note: The content to be copied from the CA certificate does NOT
include the first line containing "BEGIN CERTIFICATE" and the final
line containing "END CERTIFICATE."
d. To determine which IP protocol is enabled and which IP address
returned by the DNS server is used, configure the following
parameters.