Manualshelf

User's Manual

ManualsBrandsRaritan Computer ManualsNetwork CardRaritan Computer Network Card EMX2-111
251252253254255256257258259260
Chapter 10: Using the Command Line Interface
245
Setting the IPv4 Gateway
After selecting the static IP configuration mode, you can use this
command syntax to specify the gateway.
config:#
network ipv4 gateway <ip address>
Variables:
<ip address> is the IP address of the gateway. The value ranges
from 0.0.0.0 to 255.255.255.255.
Example
The following command sets the IPv4 gateway to 255.255.255.0.
config:#
network ipv4 gateway 255.255.255.0
Setting the IPv4 Primary DNS Server
After selecting the static IP configuration mode, you can use this
command syntax to specify the primary DNS server.
config:#
network ipv4 primaryDNSServer <ip address>
Variables:
<ip address> is the IP address of the primary DNS server. The value
ranges from 0.0.0.0 to 255.255.255.255.
Example
The following command determines that the primary DNS server is
192.168.84.30.
config:#
network ipv4 primaryDNSServer 192.168.84.30