User's Manual

Chapter 9: Using SNMP
211
SNMP Sets and Thresholds
Some objects can be configured from the SNMP manager using SNMP
set commands. Objects that can be configured have a MAX-ACCESS
level of "read-write" in the MIB.
These objects include threshold objects, which causes the EMX to
generate a warning and send an SNMP trap when certain parameters
are exceeded. See Threshold Information (on page 182) for a
description of how thresholds work.
Note: When configuring the thresholds via SNMP set commands, ensure
the value of upper critical threshold is higher than that of upper warning
threshold.