User's Manual

Chapter 2: Installing and Configuring the EMX Device
9
 Mount the device by screwing a mounting button in the back
center of each L-bracket and then having both buttons engage
the mounting holes in the rack. The recommended torque for the
button is 1.96 N·m (20 kgf·cm).
Mounting a 1U EMX Device
Using the appropriate brackets and tools, fasten the 1U EMX device to
the rack or cabinet.
To mount the 1U EMX device:
1. Attach one rackmount bracket to one side of the EMX device.
a. Align the oval-shaped holes of the rackmount bracket with the
threaded holes on one side of the EMX device.
b. Secure the rackmount bracket with Raritan-provided screws.
Note: The appropriate oval-shaped hole locations of the rackmount
bracket may vary according to the threaded holes on you model.
2. Repeat Step 1 for securing the other rackmount bracket to the other
side of the EMX.